MKDSN 1,5/ 3-5,08 HT BK

https://www.phoenixcontact.com/us/products/1985878 PCB terminal block - MKDSN 1,5/ 3-5,08 HT BK - 1985878 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 13.5 A, nom. voltage: 320 V, pitch: 5.08 mm, number of positions: 3, connection method: Screw connection with tension sleeve, mounting: THR soldering, conductor/PCB connection direction: 0 °, color: black, This article can be soldered in the reflow furnace together with SMD components. The illustration shows a 2-position version Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Extremely small design for the respective conductor cross section  Designed for integration into the SMT soldering process  The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 STK Minimum order quantity 50 STK GTIN GTIN 4017918929275 Weight per Piece (excluding packing) 4.130 g Custom tariff number 85369010 Country of origin Germany Technical data Dimensions Length 8.1 mm Pitch 5.08 mm 06/01/2017   Page 1 / 6 https://www.phoenixcontact.com/us/products/1985878 PCB terminal block - MKDSN 1,5/ 3-5,08 HT BK - 1985878 Technical data Dimensions Dimension a 10.16 mm Width 15.24 mm Constructional height 10 mm Height 13.5 mm Solder pin [P] 3.5 mm Pin dimensions 0,5 x 1 mm Hole diameter 1.3 mm General Range of articles MKDSN 1,5/..-HT Insulating material group IIIa Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 200 V Rated voltage (III/2) 320 V Rated voltage (II/2) 320 V Connection in acc. with standard EN-VDE Nominal current IN 13.5 A Nominal cross section 1.5 mm² Maximum load current 13.5 A Insulating material PA Solder pin surface Sn Flammability rating according to UL 94 V0 Internal cylindrical gage A1 Stripping length 6 mm Number of positions 3 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1 mm² 06/01/2017   Page 2 / 6 https://www.phoenixcontact.com/us/products/1985878 PCB terminal block - MKDSN 1,5/ 3-5,08 HT BK - 1985878 Technical data Connection data Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 2 conductors with same cross section, solid min. 0.14 mm² 2 conductors with same cross section, solid max. 0.75 mm² 2 conductors with same cross section, stranded min. 0.14 mm² 2 conductors with same cross section, stranded max. 0.75 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.75 mm² sleeve, max. Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings a Diagram 2,54 4,05 5,08 Current carrying capacity [A] Drilling diagram 24 20 16 12 8 1 4 1 = 1,5 mm2 0 0 20 40 60 1,3 80 100 Ambient temperature [°C] Type: MKDSN 1,5/5 Test following DIN EN 60512-5-2:2003-01 Reduction factor = 1 No. of pos.:5 06/01/2017   Page 3 / 6 https://www.phoenixcontact.com/us/products/1985878 PCB terminal block - MKDSN 1,5/ 3-5,08 HT BK - 1985878 Dimensional drawing 8,1 3,5 10 a+5,08 4,05 2,54 5,08 a Classifications eCl@ss eCl@ss 4.0 27141109 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27141190 eCl@ss 6.0 27261101 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals SEV / CCA / IECEE CB Scheme / EAC / cULus Recognized / CCA / IECEE CB Scheme 06/01/2017   Page 4 / 6 https://www.phoenixcontact.com/us/products/1985878 PCB terminal block - MKDSN 1,5/ 3-5,08 HT BK - 1985878 Approvals Ex Approvals Approval details SEV    https://www.electrosuisse.ch/en/meta/shop/product-certificates.html     mm²/AWG/kcmil 1.5 Nominal current IN 13.5 A Nominal voltage UN 250 V CCA   IK-3542-M1    IK-2722 IECEE CB Scheme    http://www.iecee.org/  CH-8225 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E60425-19770427   B D mm²/AWG/kcmil 30-14 30-14 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V CCA        mm²/AWG/kcmil 1.5 Nominal current IN 13.5 A Nominal voltage UN 250 V  IK-2722 06/01/2017   Page 5 / 6 https://www.phoenixcontact.com/us/products/1985878 PCB terminal block - MKDSN 1,5/ 3-5,08 HT BK - 1985878 Approvals IECEE CB Scheme    http://www.iecee.org/     mm²/AWG/kcmil 1.5 Nominal current IN 13.5 A Nominal voltage UN 250 V  CH-8225 Accessories Accessories Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 5 mm, Lettering field: 5 x 3.8 mm     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 06/01/2017   Page 6 / 6